How To Proceed With Harley Davidson Security System Removal

Harley Davidson Security System Removal is a process that many motorcycle enthusiasts undertake to enhance their riding experience.

In self-driven mode, riders can explore the open road without worrying about the security system. By removing the chirpless mode feature, riders can enjoy a quieter ride, fully immersing themselves in the thrill of the journey. The surface of the motorcycle is carefully examined, ensuring that all components related to the security system are properly removed.

Following the instruction sheet provided, riders can easily navigate the removal process, ensuring a seamless transition. The sounder disc, which emits alerts in case of unauthorized access, is safely disconnected to prevent any unnecessary noise disturbances. A valid arming command is then used to verify that the security system has been successfully removed.

Knowing what to expect, what to look for, and how to proceed can make the security system removal process much smoother. Here, we’ll discuss the steps you need to take to safely and effectively remove the security system from your Harley Davidson bike.

How to Proceed With Harley Davidson Security System Removal

About Harley Davidson Smart Security System

About Harley Davidson Smart Security System

The Harley Davidson Smart Security System is the perfect addition to any motorcycle enthusiast’s collection. This system is a deterrent to any would-be thief and provides total peace of mind for the rider. The components of the system include an alarm, a security fob, and a smartphone app that you can use to control and monitor the system.

Movement, vibration, or tampering triggers the alarm, which will sound like an ear-splitting siren that you can hear up to 1000 feet away. Harley-Davidson designed the Smart Security System, an innovative security system to keep motorcycles safe and secure.

The system includes a state-of-the-art alarm, a tamper-resistant key fob, and a motion-activated siren that triggers when someone moves the motorcycle. The system also includes a hands-free, factory-installed security PIN, allowing riders to access motorcycles conveniently.

How to Proceed With Harley Davidson Security System Removal-The Right Way

How to Proceed With Harley Davidson Security System Removal-The Right Way

To proceed with the Harley Davidson security system removal, it is advisable to consult the owner’s manual or seek guidance from a professional Harley Davidson technician. When removing the Harley-DavidsonĀ® Factory Security System from your motorcycle, it’s important to proceed with caution and follow the proper steps to ensure a successful removal.

One essential component to be aware of is the fuse, which protects the system from electrical overloads. Before starting the removal process, ensureĀ disconnecting the fuse safely. Additionally, take note of the NiMH battery, which powers the arming and disarming functions of the system.

To remove the system, refer to the instructions provided in your motorcycle’s retail catalog, as they will guide you through the necessary steps.

  • Keep in mind that accidental vehicle start-up can occur if you don’t disarm the system fully, so take the necessary precautions.
  • Disconnect the siren box and carefully remove the internal siren battery using a snap connector.
  • Next, detach the siren wiring and remove any plain-backed loop fasteners securing the system in place.
  • Finally, use the battery cover to protect the frame and secure any loose cables with a cable strap.

Ensure That You Have The Correct Manual

Ensure That You Have The Correct Manual.

Ensure that you have the correct manual for your Harley Davidson model. Specific instructions for removal will vary by model. When completing a task, it is important to ensure that you have the correct manual.

This manual will provide you with step-by-step instructions on how to complete the task correctly. Reading the manual thoroughly and ensuring you understand the information provided is essential. If you need clarification on the instructions, ask someone knowledgeable to help you. Carefully read and understand the instructions in the security system manual.

Gather The Necessary Tools And Supplies

Gather The Necessary Tools And Supplies

Gather the tools and supplies needed to remove the Harley Davidson security system. The tools needed are a 10mm socket, a T30 driver, and a flathead screwdriver. The supplies needed are electrical tape, a set of wire strippers, and a set of replacement connectors.

Gather the tools and supplies, then remove the left side panel to expose the TSM/TSSM module. To remove the module, use the 10mm socket to remove the mounting screws and the T30 driver to remove the electrical connector.

Disconnect The Negative Battery Cable

Disconnecting the negative battery cable is one of the first steps in removing a Harley Davidson security system. This important safety precaution should be taken before working on the motorcycle’s electrical system. You will need a wrench or socket set to loosen and remove the bolt that holds.

It is in place to disconnect the negative battery cable. Once you disconnect the cable, you can proceed with the rest of the security system removal process. To safely disconnect the negative battery cable, ensure you have the correct tools and carefully remove the battery and door cover, exposing the battery box.

Ensure the battery is battery dry and, if necessary, replace it with rechargeable batteries. Also, be cautious when handling the signal module to avoid potential damage. It is important to follow proper procedures and refer to a Harley Davidson service manual for detailed instructions on safely removing the security system from your motorcycle.

Remove The Mounting Bracket And Alarm System

Remove The Mounting Bracket And Alarm System

Removing the mounting bracket and alarm system is an important step in the Harley Davidson security system removal process. Begin by locating the mounting bracket, typically under the seat or near the battery. Use a socket wrench to loosen and remove any bolts or screws that are securing the bracket in place.

Once the bracket is removed, you can disconnect the wiring harness connecting the alarm system to the motorcycle’s electrical system. The owner’s manual provides detailed instructions for removing the mounting bracket and alarm system. Ensuring a smooth installation process at your trusted Harley-Davidson dealer.

As you round the rounded corners and enter the installation mode, remember the signals indicating proper alignment and secure attachment. This can usually be done by unplugging the connectors or cutting and splicing the wires, depending on the specific model of your Harley Davidson.

Disconnect The Wiring Harness From The Alarm System

Disconnect The Wiring Harness From The Alarm System.

When removing the security system from your Harley Davidson. One of the first steps is disconnecting the wiring harness from the alarm system. This will involve locating the wiring harness near the battery or under the seat. Once you have located the wiring harness, carefully disconnect any connections and remove any zip ties or clips holding it in place. Handling the wiring harness carefully is important to avoid damaging any wires or connectors.

Ensure proper model fitment of the wiring harness when installing the model motorcycle’s factory security system to avoid improper installation and ensure the security system lamp functions correctly. By disconnecting the wiring harness, you will effectively disable the alarm system and be one step closer to removing it completely from your Harley Davidson.

Remove The Siren From Its Mounting Location

When removing the security system from a Harley Davidson motorcycle, it is important to remove the siren from its mounting location. The siren is typically under the seat or in another accessible bike area. To remove it, disconnect any wiring connecting to the siren.

This may require using a wrench or pliers to loosen and remove any bolts or screws that are securing the siren in place. Once you disconnect the wiring and remove any fasteners, you can carefully lift the siren from its mounting location. Be sure to handle the siren carefully to avoid damaging it during removal.

Clean And Reinstall Any Necessary Components

Disconnect the negative (-) cable from the battery to clean and reinstall any necessary components. Remove the left side cover and primary cover to gain access to the frame downtubes and rear frame crossmember. Use petroleum jelly as a corrosion retardant material on the battery terminals.

Inspect the battery for any signs of damage or corrosion. If needed, replace it with a nickel metal hydride battery for longer battery life. Check the siren harness and siren connector for secure connections. Use adhesive-backed hook fastener to secure signal lamps and siren antenna wire in place.

Once all components are clean and checked, reassemble everything and connect the negative (-) cable back to the battery. Test the system to ensure all components are functioning properly under normal conditions.

Disarming The Security System Using The Personal Code

Disarming The Security System Using The Personal Code

Using the personal code, you can disarm the security system on a Harley Davidson motorcycle. The security system programs a unique four-digit number called the personal code. To disarm the system, turn the ignition switch to the “IGN” position and enter your code using the turn signal switches. Once you enter it correctly, you can disarm the security system and start your motorcycle as usual.

To properly disarm the security system using the personal code, refer to the service manual procedures for correctly installing the security module, Electrical manual connections, and siren installation procedures. Double-check all wiring connections to ensure you properly attach them. It’s important to note that if you forget your code or it doesn’t work, you may need to contact an authorized Harley Davidson dealer for assistance resetting or reprogramming the security system.

Taking Off The Locks By Removing Harley Davidson Security System

Removing the Harley Davidson security system is a task that requires careful consideration and proper execution. Before proceeding with the removal, it is important to understand the implications and potential risks involved. The security system installed in Harley Davidson motorcycles is a deterrent against theft and unauthorized use.

Removing the security system can leave your motorcycle vulnerable to theft and void any warranty or insurance coverage. Suppose you still wish to proceed with the removal. In that case, it is recommended to consult with a professional or seek guidance from Harley Davidson authorized dealers who have the expertise and knowledge to remove the security system safely without causing any damage to your motorcycle.

How Do You Find The Security Code On A Harley-Davidson?

How Do You Find The Security Code On A Harley-Davidson

Finding the security code on a Harley-Davidson is an important step in removing the security system. Typically, a small sticker with the security code is attached to the back of the ignition module. You must remove the fuel tank and side covers to access the ignition module.

Once you have located the sticker, you can use a magnifying glass or your smartphone camera to read the code, as it may be small and difficult to see with the naked eye. Writing down or taking a clear picture of the code is important, as you will need it later when reprogramming your motorcycle’s ECM.

How Do I Turn Off My Alarm System?

Turning off the alarm system on your Harley Davidson is a relatively simple process. First, locate the alarm module, typically under the seat or in a side cover panel. Once you have located the module, look for a small toggle switch or button labeled “arm” or “disarm.”

Press this button or switch to disarm the system and turn off the alarm. Some models may require you to enter a specific code or sequence of buttons to disarm the system. Consult your owner’s manual for specific instructions for your model. Remember that disabling the alarm system may impact the security of your motorcycle, so it is important to weigh the pros and cons before proceeding with removal.


How to proceed with Harley Davidson security system removal may seem daunting, but it can be accomplished smoothly and efficiently with the right tools and knowledge. Whether you’re looking to upgrade your bike or troubleshoot issues with the security system, following the proper steps is essential. By carefully researching and understanding the process, you can ensure that you remove the security system without causing any damage to your bike.

Remember to take time, follow instructions carefully, and seek professional help. By following these steps, you can successfully remove the security system and customize your Harley Davidson to your liking. As always, it is recommended to consult a professional if you are unsure or uncomfortable with the task.

Frequently Asked Questions

How Do I Permanently Disable My Harley Security System?

To permanently disable your Harley’s security system, consult the owner’s manual or contact a Harley-Davidson dealership for guidance. They will be able to provide specific instructions based on the model and year of your motorcycle.

How Do You Manually Override A Harley Davidson Alarm?

To manually override a Harley Davidson alarm, you must have the key fob. Simply press the unlock button on the key fob to deactivate the alarm.

What Is The Factory Alarm Code For Harley Davidson?

The factory alarm code for Harley Davidson is not publicly disclosed to prevent unauthorized access and theft. Contacting a Harley Davidson dealership or the manufacturer for assistance with the alarm code is recommended.

How Do You Start A Harley Without Fob Or Pin?

You can use the emergency override process to start a Harley without a fob or pin. This involves turning the ignition switch to the “ACC” position, then quickly turning it to the “IGN” position while simultaneously holding down both turn signal switches.

Why Does My Harley Ask For A Pin?

Your Harley may ask for a pin as a security measure. The pin is typically used to authenticate the owner and prevent unauthorized use of the motorcycle.

Leave a Comment