Harley Davidson has been a pioneer in motorcycles since its inception in 1903. The iconic brand is popular for its high-quality and powerful bikes that have captured the hearts of riders worldwide. However, as with any vehicle, maintaining the proper fluid levels is crucial for these machines’ optimal performance and longevity.
That’s where the Harley Davidson fluid capacity chart comes in. This comprehensive chart provides riders with all the necessary information about the fluid capacity of various Harley Davidson models, including engine oil, transmission fluid, and primary chaincase oil.
It also includes details on the recommended types of fluids and their corresponding capacities for each model. Here, we will delve into the importance of fluid capacity and how this chart serves as a valuable resource for Harley-Davidson enthusiasts.
Harley Davidson Fluid Capacity Chart – How To Read It 
The Harley Davidson fluid capacity chart is an essential tool for motorcycle enthusiasts who want to ensure that their Harley Davidson is properly maintained. This chart provides important information regarding the recommended fluid levels for various motorcycle parts, including the engine oil, transmission fluid, primary funnel chaincase layer of oil, and brake fluid.
To read the Harley Davidson-Fluid Capacity Chart, star pattern by identifying your motorcycle’s specific model and year. The chart may vary slightly depending on the model, so it is crucial to select the correct one. Once you have identified your motorcycle, you will find a detailed table listing each component’s recommended fluid capacities. When using the chart, pay close attention to the different measurements and units used for each fluid.
What Is The Harley Davidson-Fluid Capacity Chart?
A Harley Davidson Fork, Oil Capacity Chart, is a helpful resource for determining the capacity of oil needed for your fork to function properly and avoid possible damage. The chart shows common fork oil capacities for various models of Harley-Davidson motorcycles and can be a valuable tool when choosing the correct oil for your motorcycle.
The fluid capacity for the 1999 Harley Davidson front fork is nearly 10.5 ounces, according to the service, parts fiche, and owner’s Shop Manual. This is the recommended oil capacity for 1999-2003 models with disc brakes. For the 2005-2007 models, the fluid capacity is 6.7 ounces.
For the 2009-2013 models, the fluid capacity is 8.7 ounces. In 2015, XL883L sizes had an oil capacity of 7.4 ounces on the rear wheel, 6.3 on the front wheel, and 4.8 on the axle-end differential housing.
A Harley Davidson Fork Oil Capacity Chart, is available on HDForums.com for easy reference if you own a Harley-Davidson motorcycle. It provides specific oil capacity information for various models, making finding the right oil for your bike easy.
Learn About The Harley Davidson-Fluid Capacity Chart
The oil capacity of Harley Davidson is 10.5 oz for the front fork oil and 6.7 oz for the oil in the clutch slip. The oil capacities for 2000 Harley Davidson FLHT are listed on Cycle Tech Tips as 15.0 oz for front fork oil and 6.7 oz for oil in the clutch. Thread Starter provides Harley Davidson Oil Capacities with the following:
The fluid capacity for a 1999 Harley Davidson Front Fork is 10.5 ounces, whereas the oil capacity for a 2000 Harley Davidson FLHT is listed on Cycles Tech Tips as 15.0 ounces for front fork oil and 6.7 ounces for engine oil.
You need the owner’s manual and service parts to get the exact information about Harley Davidson Oil Countrides. Here is the Harley Davidson fluid capacity chart:
|
Flathead |
Best |
Secondary |
Alternate |
|
Engine |
MCS |
MCV |
— |
|
Transmission |
MCS |
SVO |
— |
|
Knucklehead |
Best |
Secondary |
Alternate |
|
Engine |
MCS |
MCV |
— |
|
Transmission |
MCS |
SVO |
— |
|
Panhead |
Best |
Secondary |
Alternate |
|
Engine |
MCS |
MCV |
— |
|
Transmission |
MCS |
SVO |
— |
|
Shovelhead |
Best |
Secondary |
Alternate |
|
Engine |
MCS |
MCV |
— |
|
Transmission |
MCS |
SVO |
— |
|
Evaluation 1340- Big Twins 1450- Revolution / V- Rods |
Best |
Secondary |
Alternate |
|
Engine |
MCV |
— |
— |
|
Transmission |
MCV |
SVI |
SVO |
|
Primary chain case |
MCV |
MCF |
— |
|
Ironhead- Evolution sporters |
Best |
Secondary |
Alternate |
|
Engine, Transmission / Chain Case |
MCV |
— |
— |
|
Harley-Davidson Part # |
AMSOIL Product |
|
|
|
99816-60 HD Engine Oil |
MCS SAE 60 Engine Oil |
|
|
|
MCV 20W-50 Engine Oil |
|
|
|
|
99851-05 Formula + |
MCV 20W-50 Engine Oil |
|
|
|
99824-03 Screamin Eagle Syn 3 |
MCV 20W-50 Engine Oil |
|
|
|
99887-84 Primary Lube |
MCV 20W-50 Engine Oil |
|
|
|
99892-84 Transmission Lube |
SVT 75W-110 Gear Lube |
|
|
|
SVO 75W-140 Gear Lube |
|
|
|
|
MCS SAE 60 Engine Oil |
|
|
|
|
99896-88 Sport-Trans fluid |
MCV 20W-50 Engine Oil |
|
|
|
MCS SAE 60 Engine Oil |
|
|
|
|
99880-73 Type B fork oil |
STM #10 Suspension Fluid |
|
|
|
99884-80 Type E fork oil |
STM #10 Suspension Fluid |
|
|
Front Fork Fluid Capacity
The oil capacity of the 1999 Harley Davidson Front fork is approximately 10.5 ounces. Generally, the oil capacity for a 1999 Harley Davidson front fork is between 7-8 ounces. This means that the oil capacity of the 2019 or older Harley Davidson front forks is generally reduced from their earlier counterparts, which can be a cause for concern in terms of longevity and performance.
However, this reduction in oil capacity is offset by improved engine lubrication efficiency and higher operating extreme temperatures. The fork oil capacity chart on the Harley Davidson Forums can help riders easily determine how much oil to add to their bikes based on their make and model.
For example, the 2013 Harley Davidson Breakout requires between 2-3 ounces of oil at idle speed, while the 2019 or newer bike may require closer to 1-2 ounces at idle speed. This can help ensure your engine runs smoothly and efficiently without requiring too much oil.
Oil Capacity
The oil capacity for a 2000 Harley FLHT is 2 litres. The fluid capacity for a 1999 Harley Davidson front fork fluid is approximately 10.5 ounces. A 2016 Harley-Davidson Softail FLS/FXS FLSS Softail Slim S engine capacity is 2.8 litres. Therefore, it is important to check the specific model and year of your Harley-Davidson for exact oil and fluid capacities.
Additionally, checking the Internet or the manual for capacities and required fluids for your specific motorcycle is a good idea. This will ensure you are properly servicing your motorcycle and keeping it running at top performance.
Transmission Oil Capacity
Harley Davidson motorcycles use a type of oil called primary oil for high-performance capacity for engines. The official maintenance recommendation is to change engine oil every 5,000 miles. You should change the primary lubricant at 5,000-mile intervals, transmission oil every 10,000 miles, and fork oil every 20,000 miles.
The Harley Fork Oil Capacity Chart indicates that the fluid capacity for the 1999 Harley Davidson front fork fluid capacity is near 10.5 ounces. For more information on maintenance and other tips for keeping your Harley running smoothly, check out websites.
Fluid Amount And Best Practices
The official maintenance recommendation for engine oil in Harley-Davidson motorcycles is to change it every 5,000 miles. To keep the engine running smoothly, you should change the transmission oil every 10,000 miles and the fork oil every 20,000 miles.
Other recommended intervals for oil changes vary depending on the type of motorcycle and its specific maintenance requirements. For example, you must change the front fork oil in a 1999 Harley-Davidson every 20,000 miles.
In addition to regularly changing engine and transmission oil, it’s also important to use the right oil for your motorcycle’s engine. So when replacing engine oil in a Harley-Davidson V-Twin bike, use 32 ounces of Harley-Davidson Transmission and Primary Chaincase Lubricant instead of just pouring in some standard motor oil.
Harley Davidson Breakout Fork Fluid Capacity
The fluid capacity for a 2013 Harley Davidson Breakout fork is 10.5 ounces. You can find the fork oil capacity for all Harley Davidson models in the Harley Davidson Fork Oil Capacity Chart. Harley Davidson models have this feature as an option for fork lock replacement.
Besides regularly changing oil, ensuring that the oil is of the correct viscosity, and using a motorcycle-specific oil, general advice for Harley Davidson fork fluids includes replacing oil whenever the level drops below a certain point or after extended periods of use.
How Much Oil Goes In The Forks Of A 2013 Breakout?
A fluid capacity chart is a handy tool to use when understanding oil and filter capacities. A fluid capacity chart outlines a given engine model’s oil and filter capacity. It provides useful information regarding how much oil a particular engine can consume.
There are two types of fluid capacity charts, the ‘General’ and ‘Breakout’ types. Engines with an oil change interval of 60000 miles or less use the ‘General’ type. Engines that require oil changes at intervals greater than 60000 miles use the ‘Breakout’ type.
A general fluid capacity chart usually shows the oil capacity of litres (L) and quarts (Q). A breakout-type chart expresses the oil capacity as millilitres (ml) and grams (g).
What To Look For In A Capacity Chart For Harley Forks?
When looking for a capacity chart for Harley forks, there are a few important things to consider. Understanding pressure is essential for designing and maintaining structures and systems that can withstand different stress levels in engineering. Harley Davidson designed the Fluid especially to provide excellent lubrication, reducing friction and wear in the engine components. Here are some key factors to keep in mind:
- Fork Oil Type: Check the recommended fork oil type for your specific Harley model. Different models may require different types of fork oil, so using the correct one is important for optimal performance.
- Fork Oil Capacity: The capacity chart will provide information on the recommended amount of fork oil for each leg. It is crucial to follow these guidelines to ensure proper suspension function and avoid any issues.
- Fork Spring Rate: The capacity chart may also include your Harley’s recommended fork spring rate information. This will help determine the appropriate level of stiffness or softness for your forks based on your riding preferences and style.
- Service Intervals: Some capacity charts may guide how often fork oil should be changed or forks should be serviced. It’s essential to adhere to these intervals to maintain the performance and longevity of your Harley forks.
- Additional Information: The capacity chart may include other details such as fork oil level measurements, recommended fork oil brands, and specific fork maintenance and adjustments procedures. These details can be valuable in ensuring your Harley forks’ proper care and maintenance.
Remember, it’s always recommended to consult your Harley Davidson owner’s manual or contact a certified Harley technician for accurate and specific information regarding your bike’s fork capacity and maintenance requirements.
What’s The Best Type Of Oil To Use For Road Riding?
Road riding with a Harley Davidson motorcycle, the best oil type is the Harley Davidson Genuine Motor Oil. Harley Davidson engines require a specific design and formulation for this oil. It provides excellent lubrication, thermal stability, and bearing wear protection, ensuring optimal performance and longevity of your motorcycle. Use the oil specified by the manufacturer for the best results.
What’s The Difference Between Different Engine Oils?
Different engine oils can vary in composition, viscosity, and additives, resulting in differences in performance and protection for your Harley Davidson motorcycle. Harley Davidson Fluid is a proprietary blend designed to meet their motorcycles’ demanding requirements. Here are some key differences between various engine oils:
- Viscosity: Engine oils are classified by their viscosity, indicating their flow resistance. The two main types of viscosity are single-grade (such as SAE 30) and multi-grade (such as 10W-40). Single-grade oils have a fixed viscosity at a specific temperature, while multi-grade oils offer viscosity that changes with temperature, providing better protection in different weather conditions.
- Additives: Engine oils may contain additives to enhance their performance. These additives include detergents, dispersants, antioxidants, anti-wear agents, and friction modifiers. These additives help to clean and protect the engine, reduce friction, prevent corrosion, and improve fuel efficiency.
- Synthetic Vs. Conventional: Engine oils can be synthetic or conventional lubricants. Synthetic motor oils are manufactured using advanced chemical processes and offer improved performance, better resistance to breakdown, and enhanced protection at high temperatures. Conventional oils, on the other hand, are refined from crude oil and are more affordable but may require more frequent oil changes.
- Performance Ratings: Engine oils are also rated based on industry standards such as the American Petroleum Institute (API) and the Society of Automotive Engineers (SAE). These ratings indicate the oil’s quality and performance characteristics, ensuring it meets the requirements of your Harley
How To Change Your Motorcycle’s Oil
Harley Davidson is a renowned manufacturer of motorcycles that has been in the industry for over a century. With a rich history and a dedication to craftsmanship, the brand has become synonymous with quality and innovation. One of the key components contributing to Harley-Davidson motorcycles’ superior performance is their specially formulated fluid. Here are How To Change Your Motorcycle’s Oil:
- Gather the necessary tools and materials, including a wrench, oil filter wrench, drain pan, new oil filter, and new oil.
- Ensure that the motorcycle is on a level surface and allow it to cool down completely.
- Locate the oil drain plug, typically underneath the motorcycle’s engine.
- Place the drain pan underneath the drain plug to catch the old oil.
- Using the wrench, carefully loosen the drain plug and allow the old oil to drain completely into the pan.
- Clean the drain plug and tighten it back into place once all the oil has been drained.
- Locate the oil filter, which is usually located near the engine.
- Use the oil filter wrench to loosen and remove the old oil filter.
- Before installing the new oil filter, apply a small amount of fresh oil to the rubber gasket to ensure a proper seal.
- Install the new oil filter by hand, tightening it until it is snug, but avoid over-tightening.
Conclusion
Knowing the bike’s fluid capacity is important if you’re in the market for a new Harley Davidson. This information will help you choose the right bike for your needs and ensure you’re fully prepared for any eventuality. An oil change is a key part of maintaining your vehicle and keeping it running smoothly.
Knowing how often to change the oil and oil filter and how much fluid to use is essential for properly functioning your car engine. Using the Harley Davidson fluid capacity chart as an inventory tool can help you determine how much fluid to change at the beginning of a job or when you’re on the go. By understanding the bike’s fluid capacity, you can rest assured that you’re making a well-informed decision when purchasing a Harley Davidson.
Frequently Asked Questions
How Much Fluid Does A Harley Transmission Hold?
The amount of fluid that a Harley transmission holds can vary depending on the specific model and year of the motorcycle. However, an average Harley transmission typically holds around 32 ounces of fluid.
How Much Oil Does A Harley Need?
A Harley-Davidson motorcycle typically requires around 3-4 quarts of oil, depending on the specific model and engine size. It’s always important to consult the owner’s manual for the precise oil capacity and to use the recommended oil for optimal performance and longevity of the engine.
How Much Fluid Goes In A Harley Primary?
The amount of fluid that goes in a Harley primary can vary depending on the specific model and year of the motorcycle. However, a general guideline is that most Harley primary systems require approximately 32 ounces (946 ml) of primary fluid.
How Do You Measure Harley Oil?
To measure Harley oil, you will need to locate the oil dipstick. Start by warming up the engine for a few minutes. Then, with the motorcycle on a level surface, remove the dipstick and wipe it clean.
How Much Oil Does A Harley 3 Hole Take?
Answers on A Harley Davidson motorcycle with a three-hole oil filter typically require around 3 to 4 quarts of oil. However, it is always recommended to consult the owner’s manual or contact a Harley Davidson dealership for the accurate oil capacity for your specific model.